sheet surfaces Laminating machine equipment
This machine is used to laminate the sheets with protective film to protective the surfaces from scratching, marking, denting during its handling, transportation
It can be single sided or two sided laminte. (it depend on you)
Use for Stainless Steel, Alum., Brass and Mild Steel (sheet or coil), and mirro surfaces but if you want to laminate the film on the mirror surface sheet you must use two protective film roll
Specifications:
1，The lamination can go forward or reverse and the machine mainly include idler roller, tension roller, pressure roller, spare roller.
2，Together with this machine are usually conveyor tables of lengths for sheets transfer.
3，cut the edge by manual.
4，Max.working length include 1300mm 1600mm,this is two type machine
Technical parameter （FM1600D Double-side film laminator）
Max.working length:1600mm
Max.working thickness:35mm
Laminating speed:about 15 m/min
Motors: 1.1KW, 2.7A
Size(LxWxH):700x2050x1250mm
Weight:about 284kgs
Suitable to laminate one or two protective films on stainless Steel & Aluminum Sheet / Strip to avoid scratchs, mark, dents during its handling, tranportation. The lamination can go forward or reverse and the machine mainly include idler roller, tension roller, pressure roller, spare roller. Together with this machine are usually conveyor tables of lengths for sheets transfer.
Technical parameter
Max.working length:1300mm
Max.working thickness:50mm
Laminating speed:2-18m/min
Motors: 1.1KW, 2.7A
Size(LxWxH):700x1800x1250mm
Weight:about 244kgs
